Bracelet Adapter (CP-85)
Bracelet Adapter is to clamp various types of bracelets especially trapezoid shape and narrow shape of bracelets.
The way of using it is putting Bracelet Adapter onto the Pin Clamp, and holding this and Pin Clamp with Pins. Therefore, Pin Clamp is necessary to utilize Bracelet Adapter.
It is made to use both side of the adapter.
On the A side, you could put the trapezoid shape of bracelet onto its curved section.
On the B side, it is tilted to downward so that you can hold the narrow shape of bracelet fitly.
Foot switch (BP-101)
Foot switch performs same function as the start button does.
It makes repeating works much easier than the start button.
If you are going to engrave on the same material and use same tool-path, I strongly recommend this one. In this kind of bulk engravings, Foot switch can save your time much more.
The way using this is simple.
Connect the Foot switch to the USB port of the Machine.
Once the transmission finished, pound the Foot switch to start the engraving.
The first engraving finished, then change the material and pound the Foot switch again. It will repeat the same tool-path again.
It is compatible with Magic-20, 30, 50, 70, F30P and F300P which have two USB port in the machine.
Best in CNC Technology